Quick answer: Ask each supplier to review the same project brief and return a scope that states material, artwork checks, sample route, panel layout, documentation, packing, delivery and exclusions. Compare total scope and production control, not only unit price. Appoint a supplier only after the artwork and physical sample approval path is clear.
A commercial wall and floor design supplier may be a manufacturer, a converter, a print specialist, an interior product distributor or a project coordinator. Each model can be valid, but the buyer needs to know where design review ends, who controls production and which company is accountable at each approval.
For custom projects, the value of a supplier is not simply access to material samples. It is the ability to translate artwork and dimensions into a clear proposal, anticipate production issues and provide documentation that the project team can approve.
1. Define the supplier scope you need
Before shortlisting, decide whether the project needs walls and floors as one coordinated package or as separate scopes with a coordinated design direction.
- Custom wallcoverings only: artwork printing, panel layout, sample and supply for wall elevations.
- Custom printed PVC flooring only: floor graphics, roll or panel planning, sample and installation support.
- Coordinated wall and floor package: one brief for both surfaces, with aligned colour, scale and sample review.
- Installation: confirm whether the supplier supplies only or also installs, and which party takes responsibility for site conditions.
- Project support: artwork editing, layout drawings, mock-ups, test documentation and delivery coordination may sit in or outside the quotation.
A supplier that is strong on material production may not provide local installation, and a design-led intermediary may not control the factory. Neither model is automatically better. The project documents should make the responsibility clear.
2. Send one comparable brief
Use the same project information for every supplier. This makes responses easier to compare and reduces the chance that one quotation looks cheaper only because it assumes less work.
- Project type, country and installation location
- Wall and floor scopes with measured dimensions and photographs
- Artwork files or visual references with intended scale
- Surface use, expected traffic and cleaning requirements
- Required technical documentation
- Sample and mock-up expectations
- Production, delivery and installation dates
- Packing, delivery point and any access constraints
If the measurements are still being confirmed, say so. A good supplier can identify provisional assumptions and list the dimensions that must be verified before production. A quotation based on “approximately the wall area” should not be confused with a fixed production commitment.
3. Ask production-control questions
The following questions reveal how the supplier will manage the gap between the design and the physical finished surface.
Artwork and layout
- Who checks print resolution, scale, bleed and colour preparation?
- Will the supplier provide a panel layout or seam drawing before production?
- How are corner wraps, openings and repeat plans treated?
- Which artwork revision will appear on the order and production documents?
Samples
- What size is the sample, and is it produced on the specified material?
- Does the sample represent the proposed print direction and finish?
- Can a larger proof or mock-up be arranged for critical approval decisions?
- What happens if the physical sample does not match the expected colour?
Production and delivery
- Will the supplier identify the exact material and available documentation in the quotation?
- What production tolerances and panel formats apply?
- How are panels labelled and packed in installation order?
- Which lead time is controlled by the supplier and which depends on freight or site readiness?
- What is the process for shortages, damage or replacement material?
One brief can coordinate two surfaces.
Space Finishes produces custom wallcoverings and PVC flooring from customer artwork and exact project dimensions, allowing scale, colour and sample direction to be reviewed together.
Review wall and floor packages4. Compare quotations on scope, not headline price
Create a spreadsheet or table with the same fields for every response. Price is one column, not the whole comparison.
| Comparison area | What to record | Question to ask |
|---|---|---|
| Material | Exact product, finish and intended application | Is this material suitable for the stated traffic and environment? |
| Artwork | Review, resizing, tiling, layout drawing and revisions | Which tasks are included and which are extra? |
| Sample | Material sample, printed proof or mock-up | What is the approval reference before production? |
| Documentation | Reports, care information and valuation of scope | Do the documents apply to the quoted material? |
| Packing | Rolls, panels, labels and replacement process | Will the site receive the product in installation order? |
| Delivery | Incoterms, freight, duties and destination | Where does supplier responsibility end? |
| Installation | Supply only or supply and install | Who prepares the substrate and accepts the finished surface? |
No fixed minimum order requirement can make a small custom project straightforward, but it does not remove the need to plan material availability, freight and installation. Confirm whether a small order is practical for the specific material and destination.
5. Look for clear specification signals
Strong suppliers tend to respond with specific questions. They may ask for the full elevation, request a vector source file, separate net area from overall dimensions or flag where performance documentation must be confirmed. These questions are a sign that the design is being evaluated as a production project.
Be cautious when a supplier offers a final colour match without seeing a physical material sample, guarantees a print outcome from a low-resolution reference, or treats a room schedule as a simple area calculation. It does not mean the supplier is unsuitable, but it should prompt a more detailed written clarification.
Also check the commercial details: whether the quoted currency is clear, what is excluded, how long the quotation remains valid, and whether the artwork revision and material reference will be attached to the order.
6. Use a simple supplier scorecard
Assign a weight to each criterion before reviewing proposals. The weights should reflect the project: a temporary exhibition may prioritise speed and panel handling, while a hotel programme may prioritise documentation, repeat consistency and mock-up control.
- Design review: Does the supplier understand the artwork, scale and installation sequence?
- Material fit: Is the quoted material clearly matched to the application?
- Sample control: Is there a physical approval step and a recorded reference?
- Documentation: Are the required reports and care information available?
- Production clarity: Are panel layout, packing and lead time understood?
- Commercial clarity: Are inclusions, exclusions, freight and responsibilities explicit?
- Communication: Are questions answered specifically with owners and next steps?
A clear next step
Ask shortlisted suppliers to return the same items: a material recommendation, artwork review notes, sample route, panel layout approach, documentation list, commercial scope and a timeline that separates production from freight. With that information, the final decision becomes a comparison of fit and control rather than a search for the lowest number.
For technical preparation, read the wall measurement and artwork file guide and the printed PVC flooring guide for retail and exhibitions.
PROJECT PARTNER
Send one brief for walls and floors.
Space Finishes can review custom wallcoverings and printed PVC flooring from the same artwork direction and exact project dimensions.