Quick answer: Define the space, expected traffic, installation life and cleaning routine before selecting a material. Design the artwork with floor joins and circulation in mind, measure the full room rather than only the area, and approve a printed sample that represents the proposed material. Confirm installation, skirting, access panels and packing before production.

Bespoke PVC flooring for exhibitions and custom printed flooring for retail stores are often sold as visual products. In practice, the success of the floor depends on visual scale, material selection, seam planning and installation discipline working together.

A retail floor may remain in place for years while an exhibition floor may be needed for a few days or weeks. Those scenarios can call for different material, installation and documentation decisions. The brief should make the intended life and use explicit before a supplier recommends a product.

1. Start with how the floor will be used

Write down the environment and the job the floor must perform. This information affects the material, surface finish, maintenance advice and installation method.

  • Project type: permanent retail store, pop-up, exhibition stand, showroom, museum installation or event.
  • Traffic: staff only, customer areas, trolley movement, queuing zones or high-footfall circulation.
  • Duration: temporary, seasonal or long-term installation.
  • Environment: dry interior, entrance area, food service, humidity, direct sunlight or temperature changes.
  • Cleaning: daily routine, spill response and any equipment that must move across the floor.
  • Removal: whether the floor will be retained, reinstalled or removed at the end of the project.

Ask the supplier to confirm that the recommended material suits the actual use. Do not compare quotations only by product name or price. Confirm thickness, wear layer, surface treatment, roll format, installation method and available documentation for the specific material being offered.

2. Plan the floor graphics around people and fixtures

A floor image is viewed from standing height, at an angle and while people are moving. Important information should not sit in a narrow strip beside a wall or under display fixtures.

  1. Mark circulation routes. Identify entrances, queuing zones, checkout paths and emergency routes.
  2. Place primary graphics in open areas. Keep key motifs and brand marks away from edges, joins and areas covered by furniture.
  3. Check scale from the entrance. Review the design from normal viewing distances, not only as a flat image on a computer screen.
  4. Use the floor as part of the whole interior. Confirm how the design relates to walls, fixtures, signage and lighting. A coordinated wall and floor visual system can be specified through one project brief.
  5. Account for access panels and removable fixtures. Decide how the floor should be cut around maintenance access and who will make those cuts.

3. Design for joins and panel layout

Printed flooring is supplied in a practical roll or panel format. The joins will depend on the material, installation method and room geometry. Ask for a layout drawing before production so the location of seams is understood and accepted.

Place joins away from the main entrance view where possible, and avoid running a critical line or logo through a seam. Confirm whether the artwork can repeat, extend or be repositioned to improve the layout. Provide the intended installation direction and clarify the room sequence if the floor continues through several zones.

Design decisionRetail storeExhibition stand
Primary goalBrand consistency and durable appearanceHigh visual impact within a fixed build-up window
Join planningKeep important lines away from customer routesAlign modules with stand panels and temporary walls
Sample focusPrint, surface and cleaning directionPrint reference, packing and installation handling
Programme riskStore downtime and phased installationShow open date, freight and on-site preparation

Send the complete floor plan.

A room outline and a total area are useful starting points. A plan with dimensions, fixtures, entrances and installation direction helps identify material and layout risks early.

Request a flooring review

4. Prepare artwork for large-format flooring

The principles are similar to custom wallcoverings: preserve the best source file, state the intended physical size and confirm the final print preparation with the supplier.

File format and resolution

Vector artwork is useful for logos, geometric patterns and text. High-resolution images are appropriate for photography and continuous-tone artwork. Keep the original source and do not enlarge a small web image until it becomes the master file. The supplier should assess image quality at final floor size before production.

Scale and crop

Confirm whether the design is supplied at 1:1, at a stated scale or with a separate layout plan. Mark any area that must remain visible. If the room proportions differ from the artwork, decide whether the design can be extended, cropped or repositioned.

Colour and surface

Provide brand references and say where colour matters most. The appearance of a printed floor is affected by the base material, surface finish and room lighting. Review a physical sample under representative conditions, and ask how the finish and cleaning method may affect appearance over time.

5. Resolve installation before the order

The best production file will not fix a site that is not ready. Confirm who prepares the substrate, who installs the floor and what access the installation team needs. Check that the delivered material is appropriate for the approved installation method.

  • Record the existing floor and who is responsible for site preparation.
  • Confirm moisture and flatness testing requirements with the installer and material supplier.
  • Plan delivery dates around the store closure or exhibition build-up.
  • Confirm roll direction, panel labels and the installation sequence.
  • Allow time for trimming around skirts, thresholds, columns and fixtures.
  • Agree how defects, shortages or site changes will be handled before installation begins.

Supplier questions for bespoke PVC flooring

Use the same set of questions when comparing a commercial wall and floor design supplier or a specialist flooring producer:

  1. Which material is being quoted, and what is its intended use?
  2. What physical sample will be supplied, and does it use the proposed print material?
  3. Which technical documents are available for this project?
  4. What are the roll widths, panel format and recommended installation method?
  5. Who prepares the floor plan and approves seam placement?
  6. What artwork checks occur before a quotation or production release?
  7. How will panels be labelled, packed and sequenced for installation?
  8. What is included in production time, and what depends on site readiness or shipping?

Retail and exhibition flooring brief

  • Accurate floor plan with entrances, fixtures, columns and access panels
  • Full dimensions, floor area and the intended installation direction
  • Expected traffic, installation life and cleaning routine
  • Artwork file, intended scale and essential visible areas
  • Seam plan and approval of panel layout
  • Printed physical sample on the proposed material
  • Required performance, slip, fire or maintenance documentation
  • Substrate responsibility and installer details
  • Packing plan, delivery address and build or fit-out dates

For more detail on coordinating walls and floors from one brief, see how to choose a commercial wall and floor design supplier. If the project uses a custom wall graphic as well, review the wall measurement and artwork guide.

RETAIL OR EXHIBITION PROJECT

Send the floor plan and design direction.

Space Finishes produces project PVC flooring from customer artwork and exact floor dimensions. Include the project use, destination and target date so the sample and production route can be reviewed.