Quick answer: Begin with a room schedule, an elevation for every wall type and the designer’s artwork. State whether the graphic repeats across rooms, how it meets corners and joinery, and which visible area must be preserved. Confirm material performance and documentation before selecting a supplier, then approve a physical sample and panel layout before production.
Custom wallcoverings for hotels are often part of a broader interior concept: a guestroom headboard wall, a corridor sequence, a lobby backdrop or a destination restaurant. The visual result matters, but the specification also has to survive repetition, installation sequencing and the practical checks of an opening programme.
A hotel feature wall supplier should be able to review the artwork against the actual wall dimensions, identify production constraints and provide a sample route before the order is released. The most useful tender conversations happen when the buyer can separate design decisions from unresolved material and site questions.
1. Define the hotel wall scope
List every location where the wallcovering will be used. A single “hotel wallcovering package” can hide very different requirements between guestrooms, corridors, lobbies, lifts, restaurants and back-of-house areas.
- Guestrooms: feature walls, headboard walls, wardrobe surrounds and repeatable room types.
- Corridors: long elevations, rhythm across doors, panel breaks and wayfinding.
- Public areas: lobby, lounge, reception and destination walls with larger viewing distances.
- Food and beverage areas: focal graphics, brand imagery and walls exposed to a more active environment.
- Spa and leisure: humid or wet-adjacent areas that need specific substrate and cleaning questions.
For each area, record the finished design intent, wall dimensions, substrate, expected installation sequence and any requirement for fire, cleaning or durability documentation. Do not assume that one material recommendation applies to every location.
2. Build a room and wall schedule
The room schedule is the bridge between interior design and production. It should let a supplier see what repeats, what differs and what must be measured on site.
| Schedule field | Useful entry | Why it matters |
|---|---|---|
| Wall ID | GRT-01, COR-03, LOB-02 | Links drawings, artwork and production panels |
| Room type | Deluxe king, twin, suite | Identifies repeat groups and variation |
| Quantity | 48 rooms plus 2 mock-up rooms | Drives material, packing and approval planning |
| Dimensions | Full width × full height | Controls artwork scale and panel layout |
| Openings and joinery | Door, wardrobe, bed wall, socket positions | Determines visible design and installation cutting |
| Artwork version | HOTEL-GRT-ART-R03 | Prevents approval and production mismatch |
| Location | Floor, wing or building | Supports delivery and installation sequencing |
Measure full elevations even when a wall has openings. A supplier may need the complete graphic composition to understand what continues behind joinery or trim. Record the net visible area as a separate planning figure.
3. Review the artwork in the room context
A design that works as a visual on a screen may change when enlarged to full wall height. Check where the focal point appears relative to the bed, furniture, lighting and room entry. Stand at the doorway view as well as the bed or seating position.
Scale and repetition
Decide whether each room sees the same framing or a continuation of a larger artwork. A cropped motif may create variety, but it can also place an important detail out of view. Mark the part of the artwork that must remain visible and the area that can be extended or cropped.
Corners and corridor rhythm
Show whether a design continues around an internal or external corner and how it meets door reveals. In corridors, check how the visual rhythm changes with every door and panel join. The installer needs a clear sequence, not only a flat plan of total area.
Lighting and colour
Review the design under the intended lighting where possible. Warm hotel lighting, grazing light and strong daylight can all affect how a print, texture or surface sheen is perceived. Use a physical sample to discuss colour and material rather than relying on a screen preview.
Start with the room schedule and artwork.
Space Finishes reviews custom hotel wallcoverings from the designer’s artwork and measured room or corridor dimensions. Early-stage references can be assessed before every detail is final.
Review hotel wallcoverings4. Confirm project performance requirements
Hotel procurement may require documentation for reaction to fire, cleaning and maintenance, substrate compatibility or other project-specific criteria. Ask the design team or authority having jurisdiction to state the actual requirements before comparing products.
A supplier should identify which materials and reports are available for the proposed scope. Treat performance claims as part of the written specification, not as a verbal assurance. Check that the report applies to the material and application being quoted, and that it is current for the project’s approval process.
Cleaning and maintenance should also be discussed at specification stage. Ask what routine cleaning is compatible with the finish, which products should be avoided and whether replacement material can be produced from the approved artwork later.
5. How to assess a hotel feature wall supplier
Compare suppliers using the same brief. A low unit price can be misleading if artwork preparation, samples, packing, documentation or install support sit outside the quotation or remain unclear.
- Ask who reviews the artwork. Confirm that the supplier checks scale, image quality, bleed and panel layout before production.
- Ask how the sample is produced. Clarify whether the sample uses the proposed material and whether it represents the final print direction.
- Request a panel and installation plan. The plan should show panel order, seam positions and how the design meets corners and openings.
- Confirm documentation. Ask which test reports and care information are available for the exact material quoted.
- State the delivery plan. Confirm packing, roll length, label sequence, destination and responsibility for installation.
- Clarify revision control. A final approved artwork version and sample reference should be recorded in the order documents.
6. Plan the sample and mock-up
A small material sample is useful for texture, print quality and initial colour review. It does not necessarily show how the full artwork will read at room scale. For high-impact hotel walls, consider whether a larger proof or one-room mock-up is appropriate.
When approving a sample, label it with the project, wall type, material, artwork version and approval date. Store a duplicate approved reference. If the sample is approved under different lighting from the final room, note that limitation and arrange a site review if the colour is critical.
A mock-up room can expose practical questions: how the graphic meets the ceiling, how joins line up, how the wallcovering sits behind joinery and whether the lighting reveals a finish that was not expected.
7. Protect the opening programme
Work backward from installation, not only from the hotel opening date. Allow time for artwork review, sample production, physical approval, any design revision, bulk production, inspection, freight and site installation. Customs clearance and movement within the building may sit outside the supplier’s production time.
Space Finishes targets sample dispatch within 3 days and production within 4–7 days after artwork and material approval. Those operational targets still need to be placed inside the full project programme, including international shipping, site readiness and installer availability.
Hotel feature wall procurement checklist
- Room and wall schedule with room-type quantities
- Full elevation dimensions, photographs and opening locations
- Approved artwork version and intended physical scale
- Must-see focal area and allowable crop or extension
- Corner, seam and installation-direction requirements
- Substrate and installer coordination
- Required fire, cleaning and durability documentation
- Physical sample, larger proof or mock-up decision
- Packing plan, delivery sequence and site storage
- Final approved sample and artwork reference retained by the project team
For the underlying file and measurement process, see how to measure walls and prepare custom wallcovering artwork. To understand what happens after approval, read how custom wall and floor finishes are sampled and produced.
HOTEL PROJECT ENQUIRY
Share the artwork and room schedule.
Send the available wall dimensions, room types and design files. Space Finishes can review the custom wallcovering approach and sample direction for the hospitality project.